Classification of vulcanizer:
Can be divided into steam type joint vulcanizing machine, vulcanizing machine, steam type flat belt vulcanizing machine, electric tape joint vulcanization machine (referred to as the tape machine), and electric type flat belt vulcanizing machine (referred to as vulcanizing machine), electric heating type explosion-proof vulcanizing machine. Now the steam curing machine usually no, multi use of electrothermal vulcanization machine.
Sulfide structure:
Vulcanizing machine is usually composed of four parts, a clamping structure, the two control system, the pressure system, the four heating system, the heating system of the three
The clamping structure is usually composed of a frame and a bolt. The control system is composed of an electric control box and one or two wires. The pressure system is composed of a hydraulic pressure plate and a pressure testing pump.
Operating principle:
Rubber belt vulcanizing is a rubber glue into the process, need to supply pressure vulcanizing machine, in the process of temperature and curing time, control. Vulcanizing machine is satisfied with the process, by the rack and the hydraulic pressure plate, electric control box and heating plate supply temperature and control the vulcanization time. Usually the domestic general rubber belt vulcanization temperature is 145 degrees, vulcanization pressure does not exceed 1.5 MPa, vulcanization time is not the same as in the tape about in the range of 30 ~ 60 minutes