If Water Leakage vulcanizing machine, vulcanizing machine, first check whether it contains a large number of raw materials for the production of water should be, if not you should see the car is the glue mouth perfect, try mixing chamber, a rotor, a discharge gate, pressure hammer, view Water Leakage position.
The vulcanizing machine is difficult to Water Leakage, causes the main reason is because the carbon black, carbon black will absorb the moisture in the air, mixing temperature of 100 degrees will produce large amounts of water vapor, vulcanizing machine discharging accumulated water will be mistaken for a mixer Water Leakage, eliminate moisture is each mixing in the process of ascension and put off the gas gland several times, so you don't have water.
Plate vulcanizing machine for a long time exposure of the metal material in the air, it is very simple corrosion, once the corrosion, his function will be affected, greatly reducing the operating life of the plate vulcanizing machine. As a result, it is very important to prevent the corrosion of flat vulcanizing machine.
1, flat vulcanizing machine all data selection of corrosion resistant materials;
2, all painted refer to anti-corrosion paint;
3, the use of corrosion resistant metal or non corrosive metal;
4. The application of corrosion inhibitor in flat vulcanizing machine.
Other aspects can also be used monochrome Offset welding machine, thermal spraying, adhesives, electroplating, brush plating and other methods for flat plate vulcanizer corrosion prevention. After the above methods can be used to avoid flat vulcanizing machine is corrosion, and then improve the service life of flat vulcanizing machine.