A flat vulcanizing machine. Results: a large flat vulcanizing machine is mainly used for curing flat belt, rubber sheet, plate, sheet, polyurethane polymer nano carbon fiber composite plate, composed of stone plates, composed of copper sheet, forming limit plate silica gel plate products produced, it has a hot plate unit area, pressure equalization, equipment operation reliable, less repair strengths. Production elements vulcanizing machine, vulcanizing is to provide the required pressure, temperature and time control; pressure by the hydraulic system through the hydraulic cylinder, the temperature by the heating medium (usually steam, thermal oil etc.) provided. Flat belt vulcanizing machine according to the primary frame structure can be divided into type plate vulcanizing machine and frame type plate vulcanizing machine two; according to the work of a single layer and multi-layer layers can be divided: according to the number of the hydraulic cylinder is divided into single cylinder and multi cylinder branch.
Two. Introduction of the function of plate vulcanizing machine:
1, PLC, touch screen control, can complete the manual and automatic control; complete active clamping, active exhaust, active fill pressure, temperature control, curing time, active alarm and active opening function; touch screen display and control in hot plate heating zone temperature.
2, hydraulic cylinder selection of QT500-7 data, the plunger selection of texture of the chilled alloy cast iron, after the fine grinding of casting; hydraulic cylinder seal using Y type sealing ring.
3, hot plate pot side of the hydraulic active roof iron, in the effect of multi cylinder under the hot plate on both sides of the pad together with the iron and steel; hot plate at both ends of the anti pad iron stacking equipment.
4, each heating zone of the hot plate is provided with a set of temperature regulating valve group, under the control of the PLC, to ensure that the heating plate temperature of each heating zone is uniform.
5, hydraulic system: the use of domestic and foreign well-known brands of hydraulic station, under the control of PLC, you can complete the initiative, mold, exhaust, mold, and many other active features.
6, mechanical synchronization or hydraulic synchronous balance organization: in the bottom of the channel is consistent with the wear of the synchronous shaft, two ends of the shaft is equipped with gear rack, or the use of hydraulic cylinder balancing device, ensure that the level of the channel.
7, mold oriented equipment: both sides of my pad platform is provided with a clamping guiding device, frame plate and channel guide seat device, guide seat processing slope, but after adjustment of the top wire slope interval.
8, open mold help organization: open mold is located in the channel below the set of forced to open the mold cylinder to pull down the mold action, will be forced to pull down the channel, to avoid sticking pot open die die scene.
Three, flat plate curing machine varieties and title:
Column frame type vulcanizing machine, vulcanizing machine, vulcanizing machine, belt conveyor belt conveyor belt vulcanizing machine, molding machine, oil / oil plugging finished special vulcanizing machine, vulcanizing machine, large bridge bracket rubber plate vulcanizing machine, vulcanizing machine, carbon fiber sheet (specific), PVC composite compressor (large) and other large special flat vulcanizing machine.