Location:Home > News information > Solution > 正文
Contact
Dongguan Baoding Precision Instrument Co. Ltd.
Miss.Cai 13717346368
Telephone: 0769-85588096Fax: 0769-82688299
Email: 13717346368@163.com
URL: www.www.chinaenglish.net
Address: No. nine Park Avenue, Houjie Town, Guangdong, Dongguan, China, No. 23
Brief introduction of the design and selection of hand tools for curing machine
At present, China's stamping machinery still need manual, material, in order to solve this problem we take manual tools. Hand operated tool for user safe operation. There are many kinds of hand tools, such as hand pliers, hooks, pliers, clamps, all kinds of suction cups (electromagnetic, vacuum, permanent magnet) and special tools.
The design and selection of hand tools should pay attention to the following points:
1 comply with safety ergonomics requirements
The handle shape of the hand tool is suitable for the operator's hand holding, and can prevent the hand from reaching the unsafe position when the hand is forced to move forward or backward, so as to avoid being hurt by the improper use of the tool.
2 simple structure, easy to use
The working part of the hand tool should be consistent with the shape of the blank, so that it can be held reliably and quickly.
3 shall not cause damage to the mold
Hand tools should be used as far as possible the use of soft materials, in case of accident, the tool is not in time to exit the mold, and the mold is closed, resulting in vulcanization machine overload.
4 meets the safety requirements for hand-held power tools
Hand operated electric tools shall be provided with safe voltage and insulation.
It should be stressed that, in normal operation, insist on the use of hand tools to reduce stamping accidents can indeed play a role, but the basic function does not have a safety device for hand tool itself, so it is not a safety device. It can only replace the hand into the danger zone, can not prevent the operator's hand accidentally into the danger zone. The use of hand tools must also use safety devices.
If the vulcanizing machine is still not up to the requirements of safety standards, it shall be forbidden to be used by the competent department and the safety technical department after the technical verification. Confirm the value of the transformation should be scrapped, resale is strictly prohibited.
The key is to use the safe operation of pressure vulcanizing machine, so it is necessary to design and manufacture of vulcanizing machine source control, especially the manufacturing sector, but from the point of view in strict accordance with the effective supervision and management system and the work that in the management will have a higher breakthrough.
The design and selection of hand tools should pay attention to the following points:
1 comply with safety ergonomics requirements
The handle shape of the hand tool is suitable for the operator's hand holding, and can prevent the hand from reaching the unsafe position when the hand is forced to move forward or backward, so as to avoid being hurt by the improper use of the tool.
2 simple structure, easy to use
The working part of the hand tool should be consistent with the shape of the blank, so that it can be held reliably and quickly.
3 shall not cause damage to the mold
Hand tools should be used as far as possible the use of soft materials, in case of accident, the tool is not in time to exit the mold, and the mold is closed, resulting in vulcanization machine overload.
4 meets the safety requirements for hand-held power tools
Hand operated electric tools shall be provided with safe voltage and insulation.
It should be stressed that, in normal operation, insist on the use of hand tools to reduce stamping accidents can indeed play a role, but the basic function does not have a safety device for hand tool itself, so it is not a safety device. It can only replace the hand into the danger zone, can not prevent the operator's hand accidentally into the danger zone. The use of hand tools must also use safety devices.
If the vulcanizing machine is still not up to the requirements of safety standards, it shall be forbidden to be used by the competent department and the safety technical department after the technical verification. Confirm the value of the transformation should be scrapped, resale is strictly prohibited.
The key is to use the safe operation of pressure vulcanizing machine, so it is necessary to design and manufacture of vulcanizing machine source control, especially the manufacturing sector, but from the point of view in strict accordance with the effective supervision and management system and the work that in the management will have a higher breakthrough.
