Mixing machine, also known as kneading machine, mainly used for rubber mixing and mixing. The mixer is a rotor, a specific shape and has a relative rotation in the closed state of adjustable temperature and pressure of clearance of the polymer material plastication and mixing machine, mainly by the mixing chamber, a rotor, a rotor sealing device, feeding pressure device, unloading device, transmission and chassis components.
Nisshin rubber and Plastic Machinery Co., Ltd. for the next mixer acceptance requirements:
First, the preparation of the operation of the mixer before operation
1: the mixer running test must be carried out on the basis of dry and solid.
2: check each part of the mixer has no foreign body, each connector and fasteners have loose.
3: check the mixer lubrication pipeline, hydraulic pipe connection is correct, the use of lubrication and hydraulic oil is appropriate, the oil level is appropriate,
Lubrication parts are in place.
4: the mixer equipment in the air before the transfer of the need for a separate inspection test to verify whether the performance meets the specified requirements.
5: check the integration of the electrical equipment and hydraulic system and pneumatic control system, etc..
6: in the mixer to connect the coupling, the first main motor idling 20min, no exception, then the coupling installed, and the installation of protective cover.
7: in the mixer main reducer high speed shaft end or in the coupling, with artificial disc drive system, make the rotor rotation for two weeks, confirmed no abnormal phenomenon.