The steam heater of small mixer is not able to solve the cause of water leakage

The mills with steam heating device if simply in the two roller between access tube and add some water sealing measures can not solve the leakage of steam (water), the reason is: (1) due to the roller, the gland and the sealing sleeve are not concentric, running after a period of time will damage the sealing screw loosening. Mixing machine. (2) the light holes on the gland and the sealing sleeve are larger than one millimeter of the screw, so that the sealing sleeve and the roller are not concentric, so that the friction between the gasket material and the steam pipe is large and small, causing the tube to swing periodically. Large enough to make the friction roller or the sealing gland and the relative motion between sets, and give a direction with the steering screw roller, the opposite torque. When the roller is counter clockwise, the screw is loose, causing sealing damage, resulting in leakage of steam (water).

Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..

Contact: Mr. Ning, 13532886368

Telephone: 0769-85588096

Fax: 0769-82688299

Q Q:799728999

Mailbox: 13532886368@163.com

URL: http://www.www.chinaenglish.net

Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan