Location:Home > News information > Solution > 正文
Contact
Dongguan Baoding Precision Instrument Co. Ltd.
Miss.Cai 13717346368
Telephone: 0769-85588096Fax: 0769-82688299
Email: 13717346368@163.com
URL: www.www.chinaenglish.net
Address: No. nine Park Avenue, Houjie Town, Guangdong, Dongguan, China, No. 23
How does the mixer plant explain the use of a small mixer?
How does the mixer plant explain the use of a small mixer?
Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..
1, regular inspection of closed rubber machine insulation effect of each line, always pay attention to the warning signs on the machine warning card.
2, the location and the mixing chamber is blocked, do not use hand or iron into the inside, but with the plastic stick to handle carefully.
3, contact closed rubber machine high temperature parts, please be careful not to be scalded.
4, the leakage of powder or sealing a scream ring, the four screw cap evenly and then screwed into the loose, then the rotor gap in the mixing room to add some material oil or oil, and then idling 3 - 5 minutes and with a hammer in the surrounding sealing ring gland spring edge light light a few can, such as leakage of powder to adjust the tightness of the individual spring, if the sealing ring gland and mixing chamber side tank that is very close to the inside of the sealing ring has been worn, need to replace the manual method, to replace the sealing ring.
5, note: daily check the gear oil, oil, oil and grease lubrication, oil level is three every day to pay attention to the CIS cup of not less than half.
6, closed rubber machine failure, the first time to stop the movement of the machine, the relevant personnel shall not do any unauthorized action, inform and wait for your machine repair personnel inspection and maintenance.
Company R & D and manufacturing as a whole, using the German advanced technology, the introduction of high-tech talent, the establishment of modern enterprise system, and constantly improve the management, development and constantly develop new products, its technical content, the degree of automation is the national leading level. At the same time, the company's internal strengthening of management, foreign attention to good faith, high-quality products to win customers at home and abroad alike.
Contact: Mr. Ning, 13532886368
Telephone: 0769-85588096
Fax: 0769-82688299
Q Q:799728999
Mailbox: 13532886368@163.com
URL: www.www.chinaenglish.net
Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan
Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..
1, regular inspection of closed rubber machine insulation effect of each line, always pay attention to the warning signs on the machine warning card.
2, the location and the mixing chamber is blocked, do not use hand or iron into the inside, but with the plastic stick to handle carefully.
3, contact closed rubber machine high temperature parts, please be careful not to be scalded.
4, the leakage of powder or sealing a scream ring, the four screw cap evenly and then screwed into the loose, then the rotor gap in the mixing room to add some material oil or oil, and then idling 3 - 5 minutes and with a hammer in the surrounding sealing ring gland spring edge light light a few can, such as leakage of powder to adjust the tightness of the individual spring, if the sealing ring gland and mixing chamber side tank that is very close to the inside of the sealing ring has been worn, need to replace the manual method, to replace the sealing ring.
5, note: daily check the gear oil, oil, oil and grease lubrication, oil level is three every day to pay attention to the CIS cup of not less than half.
6, closed rubber machine failure, the first time to stop the movement of the machine, the relevant personnel shall not do any unauthorized action, inform and wait for your machine repair personnel inspection and maintenance.
Company R & D and manufacturing as a whole, using the German advanced technology, the introduction of high-tech talent, the establishment of modern enterprise system, and constantly improve the management, development and constantly develop new products, its technical content, the degree of automation is the national leading level. At the same time, the company's internal strengthening of management, foreign attention to good faith, high-quality products to win customers at home and abroad alike.
Contact: Mr. Ning, 13532886368
Telephone: 0769-85588096
Fax: 0769-82688299
Q Q:799728999
Mailbox: 13532886368@163.com
URL: www.www.chinaenglish.net
Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan
